Fiberglas House in Illinois

Mr. and Mrs. F. O. Reh of Belleville, Illinois, have pioneered in Fiberglas greenhouses, and their experience is valuable for every grower. In their first plastic greenhouse, the Rehs used 40- by 140-inch sheets of corrugated plastic for the roof. A clear mastic was used to seal the plastic sheets together. (The sheets can also be “cemented” together with a weatherproof adhesive tape.) An overlap of one corrugation was used. The sheets were fastened to the various supports with galvanized screws, set with lead washers. In this greenhouse, there are no provisions for vents in the roof, but four screened ventilators at ground level allow air intake. Top ventilation is provided by a thermostatically controlled low-speed fan. This fan makes an air change in the house every 7 minutes without creating any drafts.

The fibers of glass in the plastic and its crinkled surface diffuse the light without casting shadows. In this greenhouse every inch of space is available for growing plants. Eighty-five per cent of the visible light is admitted but a large percentage of the infrared (burning rays) are screened out. The sunlight in this plastic greenhouse is like the light in a glasshouse on a slightly cloudy day.

Flat plastic sheets make up the side walls of the Reh greenhouse. These sheets, measuring 36 by 72 inches, are fitted with edges butted; the seams are sealed with the sticky mastic and covered with cypress molding. The greenhouse does not have a solid foundation wall; the plastic material extends to ground level giving full-length light for growing plants.

Belleville is located in the southwestern part of Illinois. The seasons are variable. Although the temperatures never dip as low as in Minnesota, it is necessary to make some provision there for heating a greenhouse. The Reh heater is a propeller fan type with steam entering a finned coil through which the fan draws air. The adjustable heater blade “pushes” the warm air in any desired direction. This circulating heater, controlled by a thermostat and an aqua stat, is suspended from the roof. It collects and circulates the cooling humid air from under the roof before moisture condenses, and fans the air back to the plants in the form of a warm, humid breeze. Since the heating unit is up near the roof, it also eliminates drip, which in conventionally heated glasshouses is caused by the condensation of moist air when it strikes and collects on the chilled glass roof. More than annoying, a regular drip of water falling on plants is a disease hazard.

Mechanical controls of temperature and humidity in this plastic setup are largely automatic, and the effects are indeed different. On the warm summer day when I visited the Rehs, the outside temperature was in the high nineties. Inside the plastic house the temperature was 85 degrees, and the air as balmy as on a spring day.

Tags: home greenhouse

Kindly consider linking to this article by just copying and pasting the code below on your website/blog ( press Ctrl+C to copy the entire code). The text link will look on your website like this: Fiberglas House in Illinois

<a href="http://www.home-greenhouse-profits.com/fiberglas-house-in-illinois.html">Fiberglas House in Illinois</a>